re:3D Supplies Parts for Testing America Makes AMCPR Exchange

A gigabot 3d printer, printing a black 8 inch coupling.

re:3D had the honor of helping to stress test AMCPR, America Makes’ new exchange for enabling rapid additive manufacturing production responses during times of crisis, like we did at the outset of the COVID-19 pandemic.

America Makes developed the AMCPR exchange to be a long lasting solution to host design files, review them for safety, and, when needed, distribute them to the US’s additive manufacturing community for production.

Part way through the development process America Makes reached out to members seeking participants to help test the exchange, and re:3D answered the call along with our peers in the 3d printing industry.

We took part in a mock-crisis scenario called Earthquakes Earn Enmity, designed to simulate a response to an earthquake which crippled water delivery systems, otherwise known as pipes!

Ironically just as we were kicking off the mock-crisis, we were faced with a real crisis here in Texas: A hard freeze dropped temperatures to record lows all across the state, and many lost power as the power grids failed to keep up with demand. Pipes burst and created a shortage of plumbing supplies. It illustrated in very real detail how important this AMCPR exchange can be where additive manufacturing can step in during crisis to quickly increase product supplies when traditional manufacturing has to wait to retool their factories.

We met over the course of two month to walk through testing. The first step was to design pipe couplings that could be successfully manufactured with 3D printing. This work was done by a team at the University of Texas at El Paso. The designs were reviewed by America Makes and validated by a separate team at UT El Paso who had not been involved in the original design work. They used the AMCPR exchange to submit and review and finally approve the designs for use on the exchange.

Gigabot 3+ 3D Printing AMCPR Couplings

After the design process, re:3D stepped in as a supplier along with Rapid Application Group, IC3D, Stratasys and Markforged to 3D print the requested couplings. We downloaded the technical data package from the AMCPR exchange, reviewed it with our contract printing team, sliced the included stl files according to their required parameters, and produced three example couplings on Gigabot 3+ XLT out of ABS filament. The three couplings measured 2”, 4” and 8” in diameter. To complete the scenario we each mailed the printed couplings to ASTM International, who was acting as the requestor in our case.

Throughout the process, we advised America Makes on clarifications and revisions the AMCPR exchange needed to improve the usability and accessibility of the system. Things like the variables that different industrial FDM 3D printers have as far as materials, size, and slicing, as well as enhancements to communications and troubleshooting.

One of the highlights for us of helping test the system was participating in some final testing walkthroughs with our customer and fellow America Makes member Pampton 3D. We got to observe how the improvements that had been made in only a few short months eased Pam’s experience first using the AMCPR exchange.

Now that this testing is done and the AMCPR exchange is live, We invite you to join us on the exchange by creating an account to be a designer, supplier or a requestor, so that together with your skills and ingenuity, when we face our next crisis, we’ll all be ready.

To read more about the AMCPR scenario testing, view the America Makes press release and presentation.

Charlotte craff

Blog Post Author

re:3D, Inc. honored by U.S. Chamber of Commerce as Community Support and Leadership Award Finalist 

US Chamber of Commerce. The Dream Big Awards presented by Chase for Business

re:3D, Inc. honored by U.S. Chamber of Commerce as Community Support and Leadership Award Finalist 

Finalists To Be Recognized During Annual Small Business Awards Program

HOUSTON, TX — The U.S. Chamber of Commerce announced re:3D Inc. from Houston, Texas as one of the finalists for its annual Dream Big Awards. The Awards, presented by Chase for Business with support from MetLife, celebrate the achievements of small businesses and honor their contributions to America’s economic growth. 

“Over the last several months, small business owners have faced challenge after challenge.  Yet, despite these challenges small business owners never stop innovating, pivoting, taking risks, working hard, and dreaming big,” said Tom Sullivan, U.S. Chamber of Commerce Vice President of Small Business Policy.  “Small businesses are a critical and vibrant sector of the U.S. economy. The U.S. Chamber is proud to celebrate the very best in American small business through our Dream Big Awards.” 

The Dream Big Awards program includes Business Achievement Awards to recognize excellence in eight categories and reflect the leading businesses in each of the following areas: community support and leadership, emerging, green/sustainable, minority-owned, veteran-owned, woman-owned, young entrepreneur, and small business of the year. This year’s finalists were selected from a record of over 700 applicants.  

The Community Support and Leadership Award recognizes the success of one small business and honors its contributions to the growth and diversity of the American economy. This award recognizes a small business that has demonstrated an exemplary level of leadership and community engagement to assist the needs of its community, and to service the needs of its customers, employees, and neighbors during the coronavirus pandemic. re:3D has provided free prototyping of life saving devices, produced PPE for their community and supported their customer’s and partners similar efforts in response to the pandemic. The company manufactures large scale, affordable 3D printers that can 3D print from plastic waste as well as traditional feedstock and gives away one 3D printer for every one-hundred that they sell to someone making a difference in their community.

“The dire needs created by the pandemic have illustrated that local, small scale manufacturing, whether in your home or in small factories around the world, can be a means to serve your communities. We are grateful to the open source 3D printing community for banding together to create solutions for PPE shortages, and were honored to work alongside our fellow makers, customers and first responders to solve this challenge,” shared re:3D Community Ambassador, Charlotte Craff.

Award winners will be announced at the virtual Dream Big Awards program on Thursday, October 15 at 2:00pm ET.

About re:3D
re:3D consists of a group of explorers committed to decimating the cost & scale barriers to industrial 3D printing. Having pioneered the world’s first and most affordable, human-scale industrial 3D printer, re:3D likewise is creating large scale, affordable 3D printers printing from pellets, regrind, and flake plastic waste. Beyond creating 3D printers for customers in over 50 countries, re:3D offers 3D printing contract services, consulting, design and education services. For more information on re:3D, visit www.re3d.org.

Charlotte craff

Blog Post Author

Barclays and Unreasonable Group select re:3D to receive $100,000 Grant in support of COVID-19 related work

Barclays and Unreasonable Group select re:3D to receive $100,000 Grant in support of COVID-19 related work

Barclays and Unreasonable Group launch second $1,000,000 fund for entrepreneurial solutions addressing challenges resulting from the global pandemic

September 22, 2020 – LONDON – re:3D has been awarded a $100,000 grant in recognition of the exceptional work being undertaken in addressing the immediate and long term challenges resulting from the effects of the global pandemic.
The grant is designed to support and amplify the impact of the work re:3D is doing.

The Unreasonable Impact COVID-19 Response initiative was launched by Barclays and Unreasonable Group earlier this year and has already supported ten Unreasonable ventures that have pivoted their businesses to combat challenges related to COVID-19.

The initiative was launched as a direct response to the outbreak of COVID19 and is an extension of Unreasonable Impact, the unique multi-year partnership between the two companies supporting growth stage entrepreneurs across the Americas, Europe and Asia Pacific regions solving many of the world’s most pressing issues.

re:3D was chosen by a selection committee for the meaningful work they are doing to provide PPE to workers in minority and underserved areas who are at greater risk for critical illness from COVID-19. The program, PPE for the People, is fiscally sponsored by Impact Hub Houston, and has donated 3D printed face shields, ear savers and other PPE to help protect restaurant and food pantry workers, as well as organizations and small businesses that seek to reopen safely, like barbershops, nail salons, and veterinary clinics. PPE for the People partners include: Baker Ripley, Creatorspace, West Houston Institute IDEAStudio, Leidos, McDermott, Stand Behind and 3DPPE. “We are actively seeking businesses and organizations looking for this protective equipment. Please share this opportunity with those in need,” said re:3D Community Ambassador, Charlotte Craff.

re:3D Co-Founder and Catalyst, Samantha Snabes and Charlotte Craff will join the 12 other grantees at a virtual event, The Unreasonable Impact COVID19 Response Exclusive Summit, created with Barclays on September 29th, where they will have a chance to share re:3D’s exceptional work with a global audience.

Joe McGrath, Barclays’ Global Head of Banking, commented, “Through Unreasonable Impact we set out to offer advice, expertise, and support to entrepreneurs so that they can more quickly increase the scale and impact of their businesses. These entrepreneurs have been recognized for their ingenious approaches to tackling almost impossible-sounding challenges, especially in some of the most challenged communities across the globe. When COVID-19 took hold this year we knew that Unreasonable Impact entrepreneurs would be among the first to pivot their talent and drive towards responding to the impacts of the pandemic – and we’re in awe of the speed with which they did just that, and of the scale of the positive impact that they have already had. We’re honored to be able to extend our support through the Unreasonable Impact COVID-19 Response Initiative, which provided grants that will help these entrepreneurs to accelerate their work in response to the ongoing pandemic.”

Daniel Epstein, Founder and CEO of Unreasonable Group, added, “Unreasonable Impact was co-created with Barclays with a shared intention to support and scale up entrepreneurial solutions to the world’s most pressing challenges. The global impact of COVID-19 is unlike any challenge any of us has seen in our lifetimes. Setting up the second COVID-Response to support and amplify even more Unreasonable ventures leveraging business to combat challenges related to the pandemic, is a natural extension of our mission. We are humbled to be supporting the exceptional work of re:3D.”

For more information and to be invited to attend the Exclusive Summit, visit https://bit.ly/3hJsIks
Full list of ventures selected:

  • 75F: Utilizing the Internet of Things and the latest in cloud computing to create systems that predict, monitor and manage the needs of buildings
  • Aerofarms: Responsibly and sustainably feeding humanity by growing flavorful, safe, and healthy food in the world’s largest indoor vertical farm.
  • Air Protein: Using microbes to convert elements of air into a sustainable protein product
  • Cell-Ed: Delivering essential skills training in three-minute lessons on any mobile phone — learners simply call, text, or click to access a world of learning
  • Green Fuels: The world’s leading supplier of biodiesel processors, producing over 400 million liters of sustainable fuel every year in over 50 countries
  • LEAF: Bringing safe and hygienic fresh fruits and vegetables to the marketplace by empowering all shareholders in the agricultural value chain.
  • Livox: The first intelligent alternative communication software for people living with disabilities, helping 20,000 people more easily interact with others
  • Purpose Works: Enabling sustainability, agility and operational efficiency in global supply chains.
  • re:3D, Inc.: 3D-printing objects 30 times larger than competing desktop models, at a more affordable cost.
  • Richcore: Eliminating contamination risks and creating safer medicines with animal origin free (AOF) proteins.
  • Sure Chill: Disrupting the entire cooling industry with new technology that doesn’t require a constant power source, enabling refrigeration of food products, life-saving vaccines, and more.
  • WizeNoze: Facilitating access to an easier-to-understand internet for children, teenagers, people with a low level of literacy, immigrants, and the elderly.
  • Árvore Educação: Improving students’ literacy skills and understanding of local and world events through a digital reading platform

About Unreasonable Impact, created with Barclays

Unreasonable Impact is an innovative multi-year multi-geographic partnership between Barclays and Unreasonable Group to launch the world’s first global network focused on scaling up entrepreneurial solutions that will help employ thousands worldwide in the emerging green economy. To date, the more than 100 ventures that comprise the global cohort operate in more than 180 countries, have raised over $2.1bn USD in funding, have generated over $2bn USD in revenue, and have created more than 30,000 net new jobs since joining Unreasonable Impact. For more information, please visit www.unreasonableimpact.com

About Barclays

Barclays is a British universal bank. The company is diversified by business, by different types of customers and clients, and by geography. Barclays’ businesses include consumer banking and payments operations around the world, as well as a top-tier, full service, global corporate and investment bank, all of which are supported by their service company which provides technology, operations and functional services across the Group.
For further information about Barclays, please visit www.home.barclays.

About Unreasonable Group

Bringing together a global network of entrepreneurs, investors, creatives and business leaders, Unreasonable acts as a catalytic platform for entrepreneurs tackling some of the world’s most pressing challenges facing us today. From designing highly curated immersive programs, facilitating access to a global network of mentors to operating a private equity fund and providing advanced storytelling and media activities, Unreasonable operates at the highest intersection of business and impact. It is uniquely positioned to support growth stage entrepreneurs solving key global environment and social challenges to scale up through the deployment of knowledge, networks and capital.
For more information about Unreasonable, please visit www.unreasonablegroup.com

About re:3D

re:3D consists of a group of explorers committed to decimating the cost & scale barriers to industrial 3D printing. Having pioneered the world’s first and most affordable, human-scale industrial 3D printer, re:3D likewise is creating large scale, affordable 3D printers printing from pellets, regrind, and flake plastic waste. Beyond creating 3D printers for customers in over 50 countries, re:3D offers 3D printing contract services, consulting, design and education services. For more information on re:3D, visit www.re3d.org.

Media Contact:

Charlotte craff

charlotte@re3D.org
+1.512.730.0033 ext 2
Social: @re3Dprinting

Announcing PPE for the People

FOR IMMEDIATE RELEASE

re:3D & Impact Hub Houston Partner to Support Small Business Access to PPE

Houston, TX – Today, re:3D – creators of large-scale, affordable industrial 3D printers and most recently, 3D printers printing from multiple types of plastic waste – announces the campaign launch of PPE for the People! This effort seeks to provide 3D printed personal protective equipment (PPE) to essential workers from under-served populations in the Houston area as they continue to carry out food, transportation, social and municipal services for our community. Fiscally sponsored by Impact Hub Houston, the campaign will provide 3D printed face shields, ear savers and other PPE to help protect restaurant and fast food workers, bus and delivery drivers as well as small businesses that seek to reopen safely, like barbershops and nail salons.

The campaign will launch today, Wednesday May 6th. To make the most of the funding for this effort, re:3D will partner with existing community groups for both identification of essential workers in underserved areas and distribution of PPE to said workers. Impact Hub Houston has offered to share their network of community groups in the southeast, south and southwest Houston metropolitan area to bridge connections, and will engage the support of the H-Force network. Additionally, re:3D is an active member of multiple existing volunteer-run grassroots networks working to supply PPE in the Houston area and will take advantage of existing distribution systems to get supplies where they are most needed. The company intends to mobilize existing customers and the greater maker community members to support additional PPE production beyond the funded amount via voluntary 3D printing drives. All designs created will be hosted with instructions in an open way through their website and other relevant file-sharing repositories.

“We are honored to help those who are most vulnerable,” said Community Liaison, Charlotte Craff. “Data from the CDC has shown minority communities are at greater risk of critical illness from COVID-19, and we want to help local small businesses protect their employees as best as possible without it being an added financial burden on already strained industries.”

For more details on the campaign, to sign up for supplies or make donations, visit https://houston.impacthub.net/ppeforthepeople/ or reach out directly to info@re3d.org.

About re:3D

re:3D® Inc. consists of a group of explorers committed to decimating the cost & scale barriers to industrial 3D printing. Having pioneered the world’s first and most affordable, human-scale industrial 3D printer, re:3D likewise is creating large scale, affordable 3D printers printing from pellets, regrind, and flake plastic waste. Beyond creating 3D printers for customers in over 50 countries, re:3D offers 3D printing contract services, consulting, design and education services. For more information on re:3D, visit www.re3d.org.

About Impact Hub Houston

Impact Hub Houston is a locally rooted, globally connected, 501c3 nonprofit organization that inspires, connects and empowers people working to solve social problems in our city and beyond. A member of the Impact Hub global network—the world’s largest community recognized by the United Nations for accelerating entrepreneurial solutions towards measurable and scalable impact—Impact Hub Houston intentionally designs places, platforms and programs to build an inclusive innovation ecosystem and equitably empower diverse changemakers, social entrepreneurs, and impact supporters to create the change they wish to see in the world.

Charlotte craff

Blog Post Author

Innovating in The Time of Corona(virus)

The exponential spread of the novel coronavirus across the globe led to overwhelming demand on supply chains and disruptions to traditional manufacturing and distribution systems. Because of societal lockdowns and stay-at-home orders, a dire need quickly arose for locally fabricated, specifically focused and creatively sourced solutions to equipment shortages and emergency supplies. At home and across the globe, designers and engineers quickly mobilized into online, open-source prototyping groups to solve the challenge of a lack of personal protective equipment (PPE), ventilators and medical device accessories. 3D printing and additive manufacturing was an obvious go-to, with the ability to rapidly prototype and iterate on the fly, teams could utilize 3D printers to supply healthcare providers with equipment now, as soon as there were designs to print. The intention and needs were obvious and clear – to aid humanity and fill the gaps in supply chains – however, organizing volunteers and streamlining the process to avoid duplicate efforts was a daunting task.

As a company with a wealth of R&D project experience and long used to working as a distributed team, re:3D put out the call that we would prototype – for free – any life-saving devices or PPE in order to expedite review by medical professionals. We are conscientious contributors to the open source design community for COVID-19 response. We take a First, Do No Harm approach to any design work we do for this effort, meaning that it needs to be designed with input from, and in partnership with, the individuals who will utilize any equipment we prototype. We will not create anything that gives a false sense of security, but is ineffective or harmful. Our medical providers on the front lines are in need, and we are honored to take on the challenge.

Face Shields

In two overlapping efforts, we prototyped a design for a 3D printed face shield with full visor coverage and an adjustable zip tie style latching mechanism. The inquiry started in Puerto Rico. Vicente Gascó, our friend and colleague from Tredé and Engine-4 shared he had a supply of 4000 clear plastic lenses for face shields, but no visor to which they would attach to the head. Armed with only the measurements of the lenses and aided by an idea from assembly guru and NASA technician Andrew Jica in Houston, Brian Duhaime, our mechanical engineer in Austin, and Alessandra Montano, our graphics designer in Puerto Rico, pumped out five different iterations of a face shield in only 48 hours.

Vicente and Luis Torres, co-founder of Engine-4, pulled our Puerto Rico Gigabot out of Parallel-18 and added it to the existing Gigabot at Engine-4. Gigabots in Austin and in Puerto Rico printed out iterations of the designs for testing.

In Houston at the same time, CTO Matthew Fiedler, mechanical engineer Helen Little and community liaison Charlotte Craff were meeting with doctors from a local hospital to discuss their needs for a face shield. Knowing that vetted, open source face shield designs were already available, the group reviewed designs by Prusa, Lazarus3D, Budmen and Professional Plastics. The Houston team 3D printed existing options for the doctors to test, but the designs didn’t meet all of the doctors’ needs:

  • Lightweight, fully closed top
  • Reducing the air gap between lens and chin
  • 180 degree lens coverage
  • Limit number of parts to reduce need to source materials in short supply

Knowing that supply chains were disrupted and very little raw materials were available in a timely manner, re:3D conferred with Professional Plastics and determined that plastic sheeting supplies were well behind schedule, but that there were excess pre-cut face shield lenses available. Again, re:3D opted to prototype to existing, local supplies, keeping stress off of traditional supply chains and getting creative with what was available.

Over the next week, Helen built on the work done for the Puerto Rico design, integrated the needs of the doctors and iterated ten different versions of the face shield while working from home and rarely getting to hold a print in her hands. The result is a single print, face shield with an adjustable latching mechanism. It’s designed for 180 degrees of protection and comfort without the addition of foam padding.  It has the approval of the hospital’s Infection Control and  is currently available at the National Institutes of Health 3D Print exchange for COVID-19 Response. https://3dprint.nih.gov/discover/3dpx-013504

Hands-Free Door Pulls

Eliminating unnecessary shared contact surfaces is imperative, especially in buildings where essential workers are operating to continue necessary services. Our team includes multiple military service members. One of our reservists was activated when she sent out a call back to our team to make some hands-free door pulls to use on the base. Aided by Matthew Fiedler, Mike Battaglia, our designer in Austin, and Brian Duhaime went to work prototyping hands-free door pulls for lever-style and bar-style door handles.

These designs were drafted before we had dimensions for either of the door styles, so had to be modeled in such a way to enable incremental dimensional adjustments while preserving the models’ shapes. During her free time, the service member sent feedback on the first versions via pictures and notes, and Brian and Mike iterated the changes remotely, melding organic shaped and attachment options into single print solutions.

The hands-free door pulls are now successfully in use on base, protecting our military personnel as they work to respond and aid COVID-19 efforts. These models are available for download here https://3dprint.nih.gov/discover/3dpx-013825 and here: https://3dprint.nih.gov/discover/3dpx-013822

From Intubation Box to Drape Stands

As a 3D printer manufacturer, we are understandably advocates of 3D printing use in manufacturing. However, we recognize that not all innovations require, or are best served by, an exclusively 3D printed solution. As we do much of our manufacturing in-house, including machining parts on our CNCs, we can apply rapid prototyping principals to traditional manufacturing methods. Take the example of an aerosol or intubation box:

We were contacted by an anesthesiologist based in Austin about modifying such a box, used to protect doctors and nurses from aerosols released when intubating a patient. The doctor’s main concerns were ability to clean and the need for a “helper” hole. This equipment needed a curved, clear surface rather than sharp corners where germs could hide. We offered to prototype using polycarbonate sheeting and an aluminum framework available in our machine shop.  In this case, the request for aid evolved before we produced a prototype. The anesthesiologist reported that the existing boxes were unwieldy and took up too much space, so instead requested a solution for supporting clear plastic drapes to achieve the same purpose and be easy to store. Matthew Fiedler proposed a combined 3d printed base and a bent aluminum frame for the project. Design work is ongoing and we will update this post as the prototype develops.

Are you a healthcare professional needing a COVID-19 related equipment solution? Please reach out to us at info@re3d.org to begin coordination. Should you wish to purchase any of our COVID-19 designs. They’re available in our online store: https://shop.re3d.org/collections/covid-19

Interested in supporting existing efforts to fight COVID-19? See below for how to help in Austin, Houston and Puerto Rico.

There is a huge maker community that has sprung to action to support the 3D printing of PPE here in Austin and the surrounding areas.  One of the largest efforts is being run by Masks for Docs (masksfordocs.com), who are actively soliciting donated face shield prints, assembling the shield, and distributing them to hospitals, health clinics, nursing homes, etc – all around the Austin area.  To help with this effort, re:3D will be collecting donated 3D printed face shields in drop-boxes at two locations, Brew & Brew and the Draught House Pub.
 
If you have a 3D printer at home or work & want to help out in the Austin area, you can access the Face Shield Design here.
 
Recommended Print Settings:
  • PETG is preferred, but PLA is completely acceptable if you don’t have PETG or are not able to print with it.
  • 3-4 solid top/bottom layers
  • .3mm layer height
  • 5 Perimeters (AKA Shells or walls)
  • 0% Infill
 
Drop off boxes can be found at:
 
Brew & Brew
500 San Marcos St #105, Austin, TX 78702
 
The Draught House
4112 Medical Pkwy, Austin, TX 78756
TXRX and the amazing maker-community continue to organize face shield collection around Houston.  We are donating 3D printed face shields as well as hosting a community donation box for makers in the Clear Lake area who are printing the face shields at home.  At our factory, the batches are consolidated and sent to TXRX for assembly and distribution to hospitals and first responders in the Houston area.  To date, over 1600 face shields have been donated from the Clear Lake area –  keep it up!
More information and the design file is available here.
 
The Clear Lake drop off box can be found at:
re:3D, Inc.
1100 Hercules
STE 220
Houston, TX 77058
The maker community, including a few Gigabots have done a fantastic job collaborating in San Juan & beyond. We are currently collecting requests for those in need of PPE and sharing opportunities to connect with Engine-4 and Trede’s efforts in Bayamon and additional efforts. If you live in Mayaguez and would like create face shields to be assembled with sheets that have been donated to Engine-4, a drop off box has been established. A UPRM student has also initiated a Slack channel to share other needs. Email info@re3d.org for access.
 
The Mayaguez drop off box can be found at:

Maker Chris’ house at:
76 Calle Santiago R Palmer E, Mayaguez PR 00680


If you live outside of these areas and/or are seeking ways to contribute, A Form to Volunteer is Available Here. We will be responding to inquiries this weekend and doing our best to facilitate introductions:)

Charlotte craff

Blog Post Author

Global Gigabot Community Rises to the Challenge of COVID-19

As we all face our new normal and adjust to the realities of life during a pandemic, our 3D printing friends and colleagues around the world have stepped up to provide much needed personal protective equipment, filling the supply gap for everyone on the front lines. This isn’t just for doctors and nurses, it’s also for the police, EMTs, grocers, gas station attendants, and every other essential worker who suit up to keep our societies’ services going during this crisis.

More close to home, we couldn’t be more honored to count many of these selfless volunteers as our customers. re:3D’s social mission to democratize manufacturing and 3D print with purpose tends to attract like minded individuals and businesses whose first instincts are to be the problem solvers for their communities.  Featured below are our friends’ efforts in their own words.

Engine-4, Tredé, Parallel18 & Daniel Varela

Bayamón, Puerto Rico

Tell us about the design you are printing.

After learning about a need for PPE, we started printing a derivative of the 3DVerkstan visor design for face shields that could accept pre-cut shields that had been donated. We chose that design because it was the fastest to print. It was nice to see along the way that it got NIH endorsement. Our expanding print farm of Gigabots & Prusa printers is located at Engine-4, and includes local Gigabots that Parallel 18, Daniel Varela, and Atlantic University (once it clears customs!) loaned to help bolster production.
Design Inspiration: https://3dverkstan.se/protective-visor/

PR Variant: Link to .stl file direct download

What material are you printing with?

We are currently printing with PLA.

Who are you printing this design for?

We are donating face shields to health professionals across PR. So far we have donated 1400. We’re also helping a doctor with 3D printed splitters. Just today we got a tightly fitted design and are doing further testing.

This fabulous group of makers who combined forces can be found online:

@engine4cws @trede.pr @p18startups

https://engine-4.com/

http://tredeprinting.com/

https://parallel18.com/

Bill Albertini

New York City, New York, USA

Tell us about the design you are printing.

When I heard about a potential shortfall in PPE supplies at New York area hospitals, my first reaction was to research mask/respirator models but soon realized they were not an ideal candidate for FDM printing. Face shields are also in short supply and there were a couple of designs that looked promising. I downloaded and tested several candidates before I found a design on March 26th by Swedish 3DVerkstan which they had just released in the wild, I soon I discovered that Weill Cornell and several other institutions had adopted this model because of its simplicity and ease of assembly. It consists of two components, a 3D printed head strap and a clear plastic shield which can be easily fabricated using letter size acetate sheet .005 or thicker and a standard 3 hole punch.

Download Site: https://www.youmagine.com/designs/modified-protective-visor-by-3dverkstan
Design Site:https://3dverkstan.se/protective-visor/

What material are you printing with?

I am currently printing with PLA but I am going to switch over to PETG as soon as I can set up better ventilation. This is an old fashioned New York loft work/live situation.

Who are you printing this design for?

Most of this first batch was donated to DIY Shield Project through connections with nycmakesppe.com, and they have been pretty much distributing to (public) hospitals with severe shortages like Elmhurst and Lincoln. I am also giving 50 kits directly to someone I know at Montefiore Hospital in the Bronx. I have also been in contact with Jenny Sabin who is running a site for Weill Cornell https://www.sabinlab.com/operation-ppe

Bill Albertini can be found online:

@bill_albertini

billalbertini.com

Efes Bronze | Serdar Erol

Yalova City, Turkey

Tell us about the design you are printing.

It is a simple face shield design that can save lives. The design came from 3BOYUTLUDESTEK.ORG platform. There are thousands of volunteers in this platform with 3D printers. “Sizi seviyoruz” is located on the shield and means that we love and thank you to all struggling with COVID-19.

What material are you printing with?

PLA

Who are you printing this design for?

All sanitarians, policemen, and some other officials that have to contact each other everyday.

Where can people sign up to assist with this effort?

WWW.3BOYUTLUDESTEK.ORG

Efes Bronze can be found online:

@efesbronze

Metabolic Foundation | Christie Mettes & Tony Sevold

Aruba

Tell us about the design you are printing.

We started working with the design from Prusa, which looked like it was carefully researched and tested and approved and it worked well, so we printed about 400 of those in total. We’ve recently moved on to the 3DVerkstan design, which takes half the time to print so it helps us increase our production. In addition to these, we’ve also designed a copy of some safety glasses they use at the hospital, which print even quicker and use less material.

What material are you printing with?

We’re printing mainly with PLA because that’s what we have, and it’s easy to work with. We’ve also used a bit of PETG and some ABS because that’s what we had, and it should work fine according to the Prusa and 3DVerkstan websites.

Who are you printing this design for?

We’re printing for the two main hospitals on the island, Horacio Oduber Hospital, and ImSan (Instituto Medico San Nicolas), as well as the department of health who are doing the testing (DVG, Directie Volksgezondheid), the psychiatric hospital organization (Respaldo), the union of family doctors and dentists, as well as individual health workers including nurses and family doctors who ask us specifically.

Where can people sign up to assist with this effort?

If you’re in Aruba, and have a 3D printer or can sew, you should sign up. Best way is to email us at lab@brenchies.com, or WhatsApp us at +297 630 2475

Metabolic Foundation can be found online:

https://www.facebook.com/brenchieslab/

https://www.instagram.com/brenchies/

Plodes® Studio | John Paul Plauché & Roya Plauché  

Baytown, TX, USA

Tell us about the design you are printing.

We are printing a head banding component of a protective face shield. It is based on a design by Prusa, and had been approved by the Czech Ministry of Health for use to help fill the void of PPE (Personal Protective Equipment). The version we are printing is a redesign by TXRX Labs and part of a volunteer effort that they had organized to help with our own local need for PPE during this worldwide COVID-19 pandemic. We are excited to see local additive manufacturing step up to a shared worldwide call, where intellectual property and design ego take a back seat to provide real time evolving, useful, and needed objects for humanity.

What material are you printing with?

We are printing with PLA from re:3D, always our first choice for on hand reliable material. We are printing 24×7 on our original (but upgraded a little) Gigabot #21! Each part is around 1hr and we are doing at least 6 units at a time.

Who are you printing this design for?

These prints are for our Houston area doctors, nurses, and staff on the front lines of the COVD-19 pandemic in hospitals and stations that are in need of PPE or anticipate a need in the coming days/weeks. Our parts are delivered to TXRX labs in Houston and are assembled with laser cut shields and elastic bands to complete the product and are distributed from there.

Where are you located?

We are located in Baytown, TX in our home office. My wife (Roya Plauché) and I (John Plauché) make up plodes® studio. We are a Texas based multidisciplinary design firm that draws from a coalescence of art, product, and architectural design. Our products are varied, authentic, minimal, and distilled with rigorous process to a balanced purity. Currently our best sellers are fire pits, so check them out and make a backyard escape for yourself while we are in this ‘Great Stay’. Help flatten the curve and please stay home as much as possible! 

Where can people sign up to assist with this effort?

We could use local area volunteers to pickup parts from us and drop to TxRX labs when we get 50-100 units at a time. Please email info@plodes.com with subject “TXRX pickup”. And please everyone visit TXRx’s go fund me at https://www.gofundme.com/f/txrx-manufactures-protective-medical-equipment and give what you can!

plodes® studio can be found online:

http://www.plodes.com/shop

@plodesstudio

CM Welding & Machine | Corey Mays

Midland, TX, USA

Tell us about the design you are printing.

We were printing a prototype ventilator splitter designed by Texas Tech and UT Permian Basin to allow up to 4 patients to use one ventilator. The first run has been sent for testing and we are waiting to hear back on that part. In the meantime we started reaching out to local medical personnel and some of the rural areas to see what needs they might have. We found the biggest need was for face shields. We chose a simple open source design and have been printing these 24/7 to fill these needs.

What material are you printing with?

For the ventilator splitter I chose PETG material and we are printing the face shield headgear out of PLA.

Who are you printing this design for?

Any medical personnel in need of face shields. 

Where can people sign up to assist with this effort?

I encourage anyone with a 3D printer to contact your local medical personnel or local universities of schools to help fill immediate needs there. Also, go to www.matterhackers.com and sign up for the COVID-19 response team. They will send out requests and files.

What has it been like for you working on this project?

It’s been exciting to be able to work on this project. As a manufacturer and mechanical designer I’m a problem solver by nature so being able to have the capability to help has been really fun and exciting! The Gigabot has been absolutely rock solid through this project. The larger print bed allows us more freedom to run different part arrangements so that we do not have to have someone here 24/7 to watch the machine. With the face shield head gear, we start a run of 6 in the morning and that run is ready to be pulled off by 5 pm. We then start a run of 8 that is ready when we come back in the following morning. I don’t think it has been off in almost 2 weeks and still going strong!

CM Welding & Machine can be found online:

Facebook: CM Welding & Machine

Pamton 3D | Pamela Szmara

Youngstown, OH, USA

Tell us about the design you are printing.

The headband design is PRUSA stl file. It is an existing design.

What material are you printing with?

We are using PETG from Village Plastics in Barberton, Ohio.

Who are you printing this design for?

We have supplied masks to Hospice of NY, the Ravenna Fire Dept in Ohio, and doctors at the Cleveland Clinic. 

Pamton 3D can be found online:

http://www.pamton3d.com/

The Kinkaid School | Jeff Diedrich

Houston, TX, USA

Tell us about the design you are printing.

The design is from TX/RX, a non-profit makerspace here in Houston. My first prints were based on a single design where I could fit 9 on the bed. Then Patrick Ferrell @PBFerrell told me about a stacked design with 9 high which meant I could do 81 at a time. This was a 110 hour print.

What material are you printing with?

PLA

Who are you printing this design for?

These are being printed for TX/RX

What has working on this project been like for you?

I am fortunate to work at a school with a Gigabot, and our head of school, Dr. Ed Trusty, was more than happy to allow me to use the school’s equipment and material to give back to the community.

Jeff Diedrich can be found online:

@misterdiedrich

Qrint Studio | Qumar Mirza

Toronto, Canada

Tell us about the design you are printing.

The designs we printed are our own design for non-medical grade face shields for local business and restaurants. Due to this reason, we made it so it could have a minimal cost.

What material are you printing with?

We printed with PETG.

Who are you printing this design for?

A local community non-profit.

What has working on this project been like for you?

We started just to help the community, but we end up applying for a health certificate so we could produce medical grade face shields.

Qrint Studio can be found online:

https://www.facebook.com/qrinting/

@qrintstudio

Doug Mockett & Co | Paul de Leon

Manhattan Beach, CA, USA

Tell us about the design you are printing.

We started printing designs a friend of mine sent to me – all from Thingiverse. After printing for a few days, I realized our two Gigabots weren’t going to be able to catch up with the demand, so Carlos and I played with the settings and got the print time down to 28 mins per visor for open visors, 35 mins for closed top visors (some hospitals preferred closed visors) which still wasn’t enough. I saw a post by a company from another country which did in house casting. That was clever so I thought we should do the same. I contacted our local silicon and plastic supplier for molding instructions and to buy materials to make silicon molds. I designed a closed visor that could work with molding and casting. I printed a few versions using our Gigabot 3+  and used that print to create a silicon mold.

We are also printing ear savers (mask extenders). These seem to be quite popular.

What material are you printing with?

PLA

Who are you printing this design for?

Local hospitals and nursing homes:

  • Torrance Memorial Hospital, CEDARS SINAI & Providence Little Company of Mary (earsavers), Long Beach Memorial Rehab, and other local clinics.
  • Delano Hospital, VA Palo Alto and other smaller clinics in other states

What has working on this project been like for you?

It has been a privilege and an amazing team experience to be able to create something to help in this time of need. It means a lot to our team to be a part of this project and donate to healthcare providers.

Doug Mockett & Co can be found online:

@dougmockett

https://www.facebook.com/dougmockett/

https://www.youtube.com/user/dougmockett

https://twitter.com/dougmockett

https://www.pinterest.cl/dougmockett/

Compendium Federal Technology LLC | Stuart Langford

Lexington Park, MD, USA

Tell us about the design you are printing.

Originally, we were going to make frames and donate them to Makers Unite in Baltimore, MD. At the time, they were asking us to use the Prusa v.RC2 face shield design.  In the meantime our CEO was communicating with local first responders, and Medstar Saint Mary’s communicated that they were running low on face shields. We used the Prusa v.RC2 face shield, but we made some minor changes so they would print faster. The straps are our design. We tried several designs including the strapless, but we received the best feedback from the modified Prusa v.RC2.

What material are you printing with?

PLA for the frame. NinjaFlex TPU 85 for the straps. The clear screens are made from clear acetate or PVC sheets.

Who are you printing this design for?

Medstar Saint Mary’s Hospital, Charlotte Hall VA Clinic, several nursing homes and private practices.

What has working on this project been like for you?

It has been busy, but rewarding. I wasn’t the only person contributing. My CEO John OConnell did the leg work, and my coworker Cedrick La Marca assisted with the CAD designs and resin printing. In addition to the face shields, we also printed spare ventilator parts for Saint Mary’s Hospital. Everything was donated free of charge.

Our story was featured on WJLA-TV Washington DC ABC affiliate.

Compendium Federal Technology LLC can be found online:

https://www.facebook.com/compendiumfederaltechnology.llc/

Are you a re:3D Gigabot customer working on COVID-19 efforts? We’d be happy to add your work to this blog. Email us: info@re3d.org 

Charlotte craff

Blog Post Author