Gigabot 4 XLT
All-Metal Dual Extruder
Out of Filament Detection
4 Point Bed Leveling
NEMA 17 & 23 Stepper Motors
0.5" Aluminum Heated
Bed with PRINTinZ
Full Color 10"
with Mainsail for
Optional Enclosure with
With a huge 590 x 760 x 900mm build volume, Gigabot 4 XLT 3D prints your towering builds with precision and repeatability.
The all-metal dual extrusion system enables 3D printing with thermoplastic filaments that melt below 320ºC, Gigabot 4 XLT’s all-metal hot end opens the door to a wider variety of 3D printing materials, including both high-strength and heat-resistant plastic as well as recycled filaments and composites.
Your open-source industrial 3D printer is powered by a 32bit Ultimachine ArchiMajor control board and Klipper firmware run on a Raspberry Pi. Access Gigabot controls via the Mainsail interface on either the 10” LCD touchscreen or a desktop or mobile web browser.
Hand-crafted in Texas by team re:3D to highly precise standards, your Gigabot 4 XLT is modular, upgradable and backed by Lifetime Customer Support.
590 x 760 x 900 mm
Compatible with hardened steel & series 20 hot ends
Supports thermoplastics melting below 320ºC
Up to 60 mm/sec XY
0.25, 0.4 or 0.8 mm
Robust aluminum cartesian frame
Cast aluminum blanchard ground flat 0.5” thick build plate
Full color 10" LCD Touchscreen with Mainsail for Klipper interface
Optional network connecting for remote monitoring & control
File Transfer Method
USB or Wifi
Open source Klipper software stack
Upload File Type
G-code (.gcode) upload file type
Includes Simplify3D setting profiles
110V 60Hz 20A or
220V 50Hz 10A
Up to 320ºC
Build Surface Temperature
Up to 115ºC